The noise levels of motorcycles can be as high as 115 dB, but if you can get a helmet that doesn’t exceed the 80 dB mark, grab it and make it your all-time cycling companion. Such will help you forget about the irritating sounds of wind whooshing past your head as you ride through the busy traffic.
Below are the top 7 best motorcycle helmets for wind noise.
Read along and discover your best choice!
Top 7 Best Motorcycle Helmet for Wind Noise
|Shoei RF-1200 Helmet||Full Face||X-Large||3.46-pounds|
|Arai Signet-Q Full Face Helmet||Full Face||Large||5 Pounds|
|HJC RPHA 70 ST Mens Full-Face||Full Face||Large||3.8 Pounds|
|SHARK Helmets EVO-ONE 2 Slasher Modular Helmet||Modular||Large||4.8 Pounds|
|LS2 Stream Omega Full Face Motorcycle Helmet||Full Face||Medium||4.8 Pounds|
|Bell Bullitt Helmet||Full Face||Large||3.5 pounds|
- Compact and aerodynamic shell
- Snell-certified full-face design
- Weighs 3.46-pounds
- Pinlock Anti-Fog System
- Dual layer/multi-density EPS liner
The RF-1200 motorcycle helmet is wind-tunnel, tested for aerodynamics and so, you’re investing in a lightweight low-profile helmet that comes ready to meet your needs. The shell’s AIM+ construction guarantees durability and strength – the helmet is strong enough to absorb and disperse energy.
The rear spoiler increases the centrifugal force whenever you’re riding at high speeds. It will suit both angled and upright riding positions.
With RF-1200 keeps, you can expect minimum wind noise but still hear other road event sounds. At only 3.46-pounds, the unit is lightweight and comfortable, allowing a steady flow of air from the well-positioned vents.
The rear exhaust vent can remain open or closed, depending on your preferences. However, closing this vent helps to reduce the wind noise. And with the visor’s seal, you can close out the wind noise and enjoy your quiet ride. The chin curtain further blocks out any external noise.
RF-1200 padding improves the fit level, which translates to comfort. The removable sections at the ears allows you to install your radio, Bluetooth, or noise-canceling system; but leaving them as they are helps to reduce the wind noise.
You can replace the washable liner system with thicker or thinner pieces for improved fit. And in case of emergencies, the quick-release on the red-taps and strap will facilitate easy removal by paramedics.
- Compact and lightweight design
- Excellent ventilation performance
- Removable, replaceable, and washable liner system
- Compact and aerodynamic shell
- AIM+ construction that guarantees durability
- May require thinner cheek pads to fit some users
- MAX-Vision Brow Vent shield
- DDL-4 exhaust vent
- Dry-Cool Surface material
- Multi-Density Single piece EPS liner
- Side exhaust cowls
The Arai Signet-Q Full Face Helmet lets you keep your cool even while riding on that noisy highway. This full-face helmet boasts an Adult Large size and comes in a Black Frost color, giving it an elegant befitting design.
It was built to cancel wind noise in two main ways;
First, the helmet’s vents have an innovative system that redirects the air across your temples, where moisture and heat often builds up. The vents will also keep your eyes clear.
Second, the helmet’s oval shape and sturdy construction material will displace the moisture and heat, preventing the formation of “hot spots” on your head.
The good news is that the helmet’s multi-density EPS liner is removable, replaceable, and washable, This feature lets you replace the interior with whatever unit that offers a perfect and comfortable fit.
Like the RF-1200 Helmet, this unit doesn’t come with a cheap price tag but it’s one of the fanciest you’ll find on the market. And so, if style and fashion are your major concern, you might want to consider the Arai Signet-Q Full Face Helmet.
- Redirects airflow across your temples
- Removable and washable interior
- Oval shape design that prevents the development of ‘hot spots’
- The construction material rapidly displaces heat and moisture
- Costlier than its contenders
- Anti-fog visor
- Internal sun shield
- Dual stage top vent
- Shell has multiple lateral spoilers
HJC RPHA 70 is another full-face motorcycle helmet for wind noise boasting a sturdy construction. The material is a mix of carbon-glass composite, carbon fiber, and aramid, resulting in a premium helmet. One look at this unit will assure you of durability.
Notably, Aramid is a strong fiber material used in aerospace and military applications for its impact resistant properties. And since the manufacturer included this, the R-PHA 70 has a top-notch quality that will stand the test of times.
You wouldn’t want to overlook this product for its price point. Though affordable, the unit comes with all the superior features that you’d expect to find in higher-end models.
At 3.8 pounds, wearing a motorcycle helmet has never been lighter! It promises not to weigh down your head even if you’re a long-distance cyclist.
Besides, it also has all the features you’d expect from a quality helmet – washable and removable liner, Skip Frog, an anti-fog treated visor, and a drop-down sun protection system.
The ventilation system is worth mentioning; this feature is breezy and with the vents open, you’ll enjoy a quiet and cool ride all day long.
When it comes to noise reduction features, this helmet ranks in the adaptation of many existing HJC racing helmets. Many of its aerodynamic and noise-reducing features are retained, but still offer the best performance possible.
Furthermore, the large cheek pads from the bottom opening understand how to dampen vibration and wind noise. It’s quiet and doesn’t have buffeting. This feature makes the helmet usable by people on machines, street bikes, and even full sports bikes.
The interior removal system offers ambulance crews responding in an accident as an easier way of removing the helmet off the head.
Overall, this noise canceling helmet is geared towards comfort and prolonged durability. And so, for a full-face closed helmet, this unit would do you good.
- Excellent build quality
- Affordable price tag
- Perfectly quiet for a full-face helmet
- Interior removal system
- aerodynamic and noise-reducing features
- Doesn’t include mics or speakers
- Polypropylene EPS Foam
- DOT Approved Modular Helmet
- Patented “Auto-up / Auto-down” system.
- Optimized chin guard locking system
- Integrated inner sun visor
- Removable and washable CoolMax liner
- Universal fit type
Even though the Shark EVO-One helmet is a past model, it continues to earn high rankings for its reliable wind noise cancellation features. It is no wonder motorists still go for the EVO-One 2 helmet, which is an upgraded version that has better features than its predecessors.
Through its virtual simulations and computational design, the manufacturer has made the noise reduction qualities exceptional. What this means is the helmet is engineered to remain stable and quiet even during high road speeds.
The breath guard is not only noise-absorbent but also retractable, removable, and magnetized. Therefore, you will not feel the irritation of wind lashing at the helmet.
Extra noise isolation is made possible by the lower lip joint that improves airflow from the rear side of the helmet. This feature will also help in protecting your head from dirt, rain, or flying debris as you ride along that busy highway.
The sun shield comes with an anti-scratch coat that improves visibility and increases durability.
You’ll love the thick face shield design that gives the unit an aesthetic appeal.
The exhaust and chin vents and line noise-isolation features are designed to ensure you experience an uninterrupted airflow. And the independent top vents at the exhaust’s front will promote air circulation.
The DOT certification is a seal of quality that allows you to use the unit legally for any of your biking or touring adventures.
Go for the Shark EVO-ONE 2 Helmet if you’re looking for an upgrade lens that will improve your nighttime visibility.
- Affordable price
- The visor has an anti-scratch coating
- Excellent noise-cancelation features
- Improved ergonomics and flexibility
- Removable and washable CoolMax liner
- Visor is difficult to remove
- Built-in Twin Shield System
- Drop Down Sun Shield
- Meets ECE/DOT requirements
- Fit is an intermediate oval
LS2’s motorcycle Helmet comes with a broad array of looks, colors, and sizes. The different sizes makes it a versatile unit that is available for almost any motorcyclist. But besides the aesthetics, this unit does a good job in wind noise cancelation for all motorists.
The ECE/DOT certification makes it suitably safe for road use.
It features a quick release chin strap that is easy to use – motorists can put it in place even while wearing gloves. The strap remains incredibly strong and will not snap in case an accident occurs.
The cheek pads are neatly cut using a 3D laser cutting tool, allowing a contoured shape for a perfect fit and no hot spots.
For utmost protection, the helmet employs a multi-density EPS in the safety liner. And it is easy to keep the inner lining fresh, clean, and smell-free; simply remove and wash it. Though this feature may seem trivial, it makes this unit outperform the competitors that do not have a removable lining.
You shouldn’t experience any difficulties when ‘dropping’ down the sun visor. It locks smoothly and tightly to improve your safety, especially during the summer reason. No more fumbling and struggling with the visor.
- Removable and washable technical fabric liner.
- Breathable, hypoallergenic fabric for comfortable padding
- Toolless Quick Release Face Shield
- Chin strap that makes getting your helmet off and on a breeze.
- Contoured cut for a better fit
- It comes in medium size that may not fit every motorist. Choose bigger sizes if this one doesn’t fit
- Noise levels don’t exceed 82 dB
- 60% better air inlet than the C3
The original Schuberth C3 helmet was one of the best quietest helmets ever made. Even at high speeds, the unit could still protect the noise from wind noise, giving the cyclist a comfortable ride.
The manufacturer still improves on the quality, giving the current Schuberth C3 Pro Helmet some excellent noise-canceling features that performs better than the past helmets.
This helmet is designed for less buffering and improved downforce. Therefore, even as your bike flies through the busy traffic, you will not experience any wind noise.
It also does not hurt to know that the helmet comes with a wind deflector that improves on noise cancellation. Seemingly, the manufacturer was so intentional in designing all the noise cancelation features herein.
The sound level of the unit rarely rises above 82 dB. The rear spoiler comes with optimizations through thorough wind tunnel testing. With the enhanced aero-acoustics, the unit ensures that even at 100mph, the noise levels do not exceed 82 decibels.
Despite its noise isolation characteristics, the helmet comes with an improved ventilation system that guarantees for 60% better air inlet. The distribution channels ensure that the air is uniformly distributed throughout the helmet, making it comfortably quiet on wearing it.
- Noise levels don’t exceed 82 dB
- 60% better air inlet than the C3
- It is designed for stability even in strong wind
- It’s quite expensive
- 3 low-profile carbon composite shells
- Contoured cheek pads with integrated speaker pockets
- Clear Bubble shield
- Front chin vents with metal exhaust vents and mesh intake
The Bell Bullitt is a DOT-approved motorcycle helmet that is available in a low-profile fiberglass or 3K carbon fiber shell construction. The large and wide viewing port is ready to improve your visibility when riding on busy streets.
The unit is well protected in a double-D closure and padded with a strap for increased comfort level. The flat face shield can be customized with bubble one and you’ll be lucky if your supplier includes both of these.
Though the visor doesn’t have a rubber seal, it helps in blocking some wind noise to ensure you have a n excellent airflow over your face.
The liner boasts a genuine leather construction and thick foam padding. This interior is removable, replaceable, and washable.
Further, the unit comes with different contoured cheek pad sizes to help you get your perfect fit, which also controls the wind noise levels. The speaker pockets that are integrated on the unit also helps in reducing wind noise around the ears by eliminating ‘hot spots.’
Additionally, the rear exhaust and 4 forehead vents channel the airflow over your head, reducing wind noise and giving you a cooling ride. On the other hand, the front chin vent bears a switch inside the helmet that also promotes the flow of air.
- Industry-leading five-year warranty
- DOT approved and meets the FMVSS 218 standards
- Removable and washable interior
- It may not be the best choice for long trips or high speeds
Best Motorcycle Helmet for Wind Noise Buying Guide
Factors to Consider when Buying a Motorcycle Helmet for Wind Noise
- Snug Fit
Getting a motorcycle helmet that fits snugly in the neck roll is crucial if you’re looking into wind noise cancelation. An incorrectly-sized unit will create noise and vibrations when the visor is opened.
During your purchase process, confirm that the unit has well-placed foam and pads that will promote snug fitness and dampen vibration while reducing the noise travels up to your ears.
If you’re purchasing the unit from a local store, be sure to try it out first before making a purchase decision. If you feel air coming in from the bottom side, it might be too large for you.
- Aerodynamic Design
The quietness levels of a helmet depends on the unit’s aerodynamic design.
When you’re looking for the best helmet, you should be keen on the overall design of the unit more than anything else.
If the shell is designed in a manner that air slides over it, then the helmet should do an excellent job in noise isolation.
If the helmet’s bottom is smooth, curved, and tight and the top is wide, it probably has excellent noise reduction properties.
Motorcycle helmets that drive away excess air from below are the best choices. Confirm if the chin piece that wraps around your jaw is open to airflow.
If the helmet’s visor seal is poorly constructed, you’ll notice a loosening that produces noises. The helmets will remain quietest if the visor is fully closed.
Check if the helmet’s strap is easily adjustable.
You’ll notice that if the strap is incorrectly adjusted, it will flap around noisily and will not offer full protection when an accident occurs. Notably, the strap does not make too much noise, unless you’re left with other hanging straps outside the buckle even after adjustment. However, most modern motorcycle helmets have toothed straps that will not have this issue.
- Chin Curtains
The line chin curtain also helps in repelling wind and noise, while staying away from your face. The curtain works wonders when it comes to noise reduction, allowing you to cycle in peace even at higher speeds or busier highways.
Proper ventilation not only reduces the wind noise but also gives you a comfortable ride. It allows you to control the flow of air through the EPS tunnels, thus removing moisture, heat, and ‘hot spots.’
- Wind Tunnel Testing
Wind-tunnel testing and painstaking modeling is often done at several angles. The testing ensures that the helmet doesn’t experience a lot of drag when you’re tilting your head at different angles. Additionally, the process helps in determining the helmet’s stability when the wind hits constantly. The less the unit wobbles on the face, the higher its chances in minimizing wind noise on the highways.
Our Top Pick
An honorable mention goes to the Shoei RF-1200 Helmet. It’ll suit anyone who’s looking for a full-face motorcycle helmet with a wider field and quiet performance. For people who love off-roading, trailing, touring, and many such aesthetics, this helmet would be a great choice to consider thanks to its quality AIM+ construction.
While the expensive price tag might not be attractive to some, the high-end features and overall build of the unit is a worthwhile investment.
All the best in your purchase!
Frequently Asked Questions (FAQs)
Q: How can I get rid of wind noise on my motorcycle helmet?
A: First, be sure to wear the helmet properly and adjust the windscreen to fit you best. Other tips include wearing helmet earmuffs, earplugs, or a scarf, using a wind blocker, or stuffing the helmet with fleece.
Q: Do motorcycle wind deflectors work?
A: The deflector is a handy tool for every motorcycle rider, but more suitable for tall drivers who’re struggling with improperly or low profiled windscreen. The wind deflectors will help in avoiding excess air pressure while riding.
Q: How do I fight wind when cycling my motorcycle?
A: It’s advisable to ride behind the windscreen if you’re trying to fight wind. Be as streamlined as possible to reduce the friction between your body and the wind. A headwind may slow you down and so, you’ll need to be cautious that it does not compromise your safety.
Q: Is it dangerous to ride a motorcycle in the wind?
A: It’s not advisable to ride your motorcycle in high wind, especially when the road is wet. High winds are dangerous and can blow off your bike. Furthermore, strong wind makes riding a hustle and can be quite annoying. That’s why you shouldn’t go riding in gale-force winds.
Q: At what wind speed should I not ride a motorcycle?
A: Winds during thunderstorms can be as high as 58 mph, making dangerous conditions for motorcycle riders. Combined with wet roads and rain, the weather conditions are not safe for any motorcyclist.